L
K
K
F
B
square before
B
nailining back panel.
B
Caution
:
Ensure cupboard is
Screw 1
Screw 2
B
•
Screw 1 is used for adjustment
•
Screw 2 is used to secure hinge to
end
The following instructions show how to
adjust hinges if the gap between the
doors is too wide.
1.
Start from the top hinge
2.
Loosen
screw 2
by turning screw
in an anti-clockwise direction.
3.
Now turn screw 1 in a clockwise
direction (the amount to turn this
screw is determined by the width
of the gap between the doors).
4.
Tighten screw 2 by turning in a
clockwise direction
5.
Repeat these steps for the centre
hinge and bottom hinge
6.
Repeat these steps again with the
other door
7.
Check gap between doors
(should be approx 2mm), if not
repeat steps 1 to 5.
Controlled Document 9.2.4.11
Revision 2
TP05-145
