10
Ou
r fa
m
ily
, in
no
va
tin
g h
ea
lth
, fo
r y
ou
rs.
Change sensor
Calibrate device
Description
piCO
™
piCO
baby
™
Micro
+
™
Attach flow meter to gas
canister
Attach calibration adaptor
to D-piece™
Attach D-piece™ to monitor
and turn on gas flow
Unit calibrating
Calibration successful
Calibration failed
Retry calibration
Firmware version
N/A
= Not Available on this device
Warnings and maintenance
1.
Mouthpieces should be replaced after every use.
2.
Hands should be washed regularly in accordance with infection control practice.
3.
Please do not attempt to modify the equipment in any way or use accessories not specified
by the manufacturer. Any attempt to do so will invalidate the warranty and may
compromise the safety of the device.
4.
Bedfont® will make available upon request service training to appropriately qualified
persons.
5.
Holding the reset button down for 30 seconds will perform complete device reset,
this will
clear any saved data and revert all settings to the factory defaults
. After performing a reset
the device will need to have the date/time set and be calibrated before it can be used.