© BECOM Systems 2020
13
|
30
Hardware User Manual - Argos3D - P33x
Last change: 29 June 2020/Version 12
4
Interface Description
4.1
Signal naming
Signal names are usually written in capital letters. They are noted in positive logic (positive asserted). If the signal
is negative asserted an “n” will be added as prefix to the signal name.
Type:
The type describes the electrical characteristics of the signal. The following types are available:
•
I
Input
•
O
Output
•
DN
Negative Differential Output
•
DP
Positive Differential Output
•
P
Power supply
4.2
Connector Numbering
All pins no. 1 of each connector are marked in the figures with a red arrow. The connector numbering always starts
at this pin, continuing in this row, and going backwards at the opposite side.
4.3
Interface-Slot
Marks Pin #1
b
a
c
f
e
d
g
i
h
j
k