13 / EN
Hood / User Manual
3.2.2 Hammering the wall plugs
Hammer Ø 10 mm wall plugs (X,Y) into the holes
drilled for hanger screws. Hammer 2 x Ø 6 mm
wall plugs (Z) into the holes drilled with a Ø6
mm bit for the external flue connection plate.
(Figure 5)
3.2.3 Installing the hanger
screws
Install 5.5x60 hanger screws into the Ø 10 mm
wall plugs (Y) you have hammered into the wall.
There must be a gap of 5 mm between the screw
head and the wall.
(Figure 6)
Connect the internal flue connection plate to the
6 mm wall plugs (Z) on the wall using Ø 3.9x22
screws.
(Figure 6)
Y
Y
Z
X
Z
X
(Figure 6)
5.5 x 60 Cross-
head screw
3.9 x 22 Cross-head
screw
3.2.4 Hanging the hood onto the
wall
•
Hang the hood onto the screws you have
installed into the Y holes.
•
Open the side suction window of the
hood by pulling it towards yourself. In-
stall the 5.5x60 screws through the X
holes located inside in order to secure the
appliance.
3
Installing your appliance