User manual | EMS-8x-DU | Beckmann GmbH
No
Parameter name/Parameter explanation
Typ
Range
P25
Auto-stop time
Specifies the seconds after which a water
discharge is automatically stopped. After an auto-
stop the unit can be restarted for the remaining
time (for example see figure 5)
Operat.
0 to 240
P26
Start button enabled
If ON, the input for the Start/Stop-Button is
enabled.
Switch
On / Off
P27
Hygiene flushing after non-use
Specifies the time after last use in hours when a
hygiene flushing is started.
0 = no flushing
Operat.
0 to 23
P28
Hygiene flushing duration
Specifies the hygiene flushing time in seconds.
0 = no flushing
Operat.
0 to 240
P29
Cold water delivery time
Specifies the time of a free cold water delivery free
of charge (not in flow control mode)
0 = no cold water delivery
Operat.
0 to 600s
P30
Test mode
Test Mode of device can be started.
Switch
Start/Stop
P31
In operation
If OFF, the device can be switched out of service
(in case of failure).
Switch
On / Off
P32
Storage
If ON, the remaining time will be saved in case of
power failure, so that the operation is continued
after the power failure. If OFF, the device is free
after a power failure.
Switch
On / Off
P38
Flow control operation mode
If ON, the time period begins with the removal of
hot water.
Switch
On / Off
Page 11
Vidhaugen 114
7550 Hommelvik
Tele:73979017-91795392
e-post: [email protected]
www.tgelectronics.no
