Beckman Coulter Navios Instructions For Use Manual Download Page 330

Page: 330 / 586

773232AH

10-134

Using Navios Software

Analysis Menu

To edit the Region name, type in the desired changes, if any, click

To move the Region Name, mouse over the region to get the

cursor. If the region name has

multiple characters, mouse over the first character to get the

cursor.

+ hold and drag

to move the region name.

to fix the location of the region name.

Deleting Regions

There are two methods used to delete regions,

From Within a Plot

and

Using the Delete Button in

the View / Modify Regions Dialog Box

NOTE

If a plot is deleted, its regions are still retained.

From Within a Plot

the Region.

The Region is now active and handles appear.

Press

(

Delete

)

. The Region is now deleted. Any Gates and statistics that were associated with

this Region are also deleted.

Summary of Contents for Navios











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Navios

Reviews:

Related manuals for Navios

Brands by name

Popular brands

Beckman Coulter Navios, Instructions For Use Manual

Search results

Summary of Contents for Navios

Reviews:

Related manuals for Navios

Brands by name

Popular brands