Beckman Coulter Navios, Instructions For Use Manual

Page: 331 / 586

773232AH
10-135
Using Navios Software
Analysis Menu
10
Using the Delete Button in the View / Modify Regions Dialog Box
1
.
2
the Region to delete and .
Use
(
Ctrl+
)
to select multiple regions to delete.
Use
(
Ctrl+A
)
to select all of the regions.
3
or press
(
Enter
)
to delete the Regions.
or press
(
Esc
)
to exit the dialog box without deleting any selected Regions.
When you exit the View / Modify Regions dialog box, Navios software updates all the Windows.
If a deleted Region was also specified in any statistics or Gates, then Navios software updates to
reflect these changes.
Re-Calculate All AutoGates
Use this function to re-calculate multiple autogates in a protocol, rather than re-calculating them
individually.
Create Prism Divider
Dual Prism Divider
The
Analysis > Create Prism Divider > Dual Prism Divider
menu option allows you simultaneously set
two Prism dividers in a “quadrant fashion" on a dual parameter plot. Any displayed Prism Plot is
automatically updated with the new Prism statistics. If the number of Prism dividers is changed
during the divider creation, the corresponding Prism plot also reflects this by changing its format
according to the number of active Prism dividers.
NOTE
Navios Cytometer software only allows one Prism divider per parameter and the dividers are GLOBAL
across the application. As a consequence, modifying the Prism divider of any parameter on any plot
automatically updates the divider of that parameter if it is displayed on any other plot. This includes both
dual and single parameter plots.