Recalling Results by Run Date/Time
Introduction
IMMAGE 800 Operations Manual A11403
Results Recall
September 2016
Page 8-9
8
Recalling Results by Run Date/Time
Introduction
Results can be recalled by Run Date/Time.
Recalling by Run Date/Time
Follow the steps below to recall results by Run Date/Time.
Step
Action
1
Select
Results
from the menu bar. (Refer to Figure 8.1.)
2
Enter the desired date and time ranges in the
From
fields and
To
fields.
3
Select the options button
<
▼
>
beside the
Data Source
field.
4
Select
Computer
to recall results in the current database stored in the hard
disk.
OR
Select
Diskette
to recall results from diskettes that have been restored into
the hard disk. (Refer to CHAPTER 10,
Utilities
instructions on how to back up and restore the database.)
NOTICE
Patient results restored from diskettes cannot be sent to the host.
5
Refer to Displaying Recalled Results on the Screen and Printing a Recalled
Result in this chapter to display or print results.
