Recalling Results by Run Date/Time
Additional Information
Results Recall
IMMAGE 800 Operations Manual A11403
Page 8-10
September 2016
Additional Information
Refer to CHAPTER 5,
System Setup
Table 8.1
Run Date/Time Field Entry Options
Field
Entries
Notes
Date:
From and To
mm: 1-12
dd: 1-31
yy: 0-99
• If only a
From
date is entered, the results
will be recalled for the 24-hour period of
that date.
• The order and the separator character are
defined in Setup.
• An entry in the
From
field is required.
Time:
From and To
(12-hour
format)
hh: 1-12
mm: 0-59
AM/PM:
• Select the options
button
<
▼
>
beside
the
AM/PM
field.
• Select
AM
or
PM
• A time entry is optional. If only a date is
entered, results will be recalled for each
24-hour period in the date range.
• Time is not allowed to be entered unless
date is entered.
• The time format is defined in Setup as 12-
hour or 24-hour.
• The separator character is defined in
Setup.
• The 12-hour default is AM.
Time:
From and To
(24-hour
format)
hh: 0-23
mm: 0-59
