Learning to Create Methods for the Biomek® 3000
2-13
Biomek® 3000 Laboratory Automation Workstation Quick-Start Guide
The destination labware is now configured, and the main editor looks like Figure 2-
Transfer
step is now configured to transfer 100 µL from the source reservoir
Resv
to the destination microplate
Dest1
.
Figure 2-10. Transfer step with Destination configured
Note:
The method view changes to reflect the amount transferred when the next step
is configured.
The
Transfer
step configuration is now complete. In the next section, you will
configure a
Move Labware
step to move the destination labware to a different deck
position using the gripper tool. If your instrument configuration does not include a
gripper tool, skip to Section 2.6,
, to learn how long the method
will take to run.
Caption changes
to reflect the
amount transferred
when the next step
is configured.
