PN B05529AE
vi
Safety Notice
Electrical Safety
Electrical Safety
To reduce the risk of electrical shock, this equipment uses a three-wire electrical cord and plug to
connect this equipment to earth-ground. To preserve this safety feature:
•
Make sure that the matching wall outlet receptacle is properly wired and earth-grounded.
Check that the line voltage agrees with the voltage listed on the name-rating plate affixed to
the instrument.
•
Never use a three-to-two wire plug adapter.
•
Never use a two-wire extension cord or a two-wire non-grounding type of multiple-outlet
receptacle strip.
Do not place containers holding liquid on or near the chamber door. If they spill, liquid may get into
the instrument and damage electrical or mechanical components.
Safety Against Risk of Fire
This centrifuge is not designed for use with materials capable of developing flammable or explosive
vapors. Do not centrifuge such materials (such as chloroform or ethyl alcohol) in this centrifuge nor
handle or store them within the 30-cm (1-ft) clearance envelope surrounding the centrifuge.
Mechanical Safety
For safe operation of the equipment, observe the following:
•
Use only the rotors and accessories designed for use in this centrifuge.
•
Before starting the centrifuge, make sure that the rotor tie-down screw is securely fastened.
•
Do not exceed the maximum rated speed of the rotor in use.
•
NEVER attempt to slow or stop the rotor by hand.
•
Do not lift or move the centrifuge while the rotor is spinning.
•
If a glass tube breaks inside the chamber bowl, be careful when examining or cleaning the
gasket or chamber, as sharp glass fragments may be embedded in their surfaces.
•
NEVER attempt to override the door interlock system while the rotor is spinning.
•
Maintain a 7.6-cm (3-in.) clearance envelope around the centrifuge while it is running. During
operation you should come within the envelope only to adjust instrument controls, if
necessary. Never bring any flammable substances within the 30-cm (1-ft) area surrounding the
centrifuge. Never lean on the centrifuge or place items on the centrifuge while it is operating.
Summary of Contents for Allegra X-30 Series
