Beckhoff TwinSAFE EL6910, Operation Manual

Page: 63 / 144

Operation
EL6910 63 Version: 1.8.0
4.4.7 Downloading the safety application
Before downloading the safety project to the EL6910/EJ6910 or a logic component, the project should first
be checked for validity. If the hardware is complete, the hardware level can be used for checking, or
checking can take place at the project level , if online access is only available for the EL6910/EJ6910 or
the logic component. If the check returns no errors, the project download can continue.
CAUTION
Use only qualified tools
Only use a qualified tool (see note on system limits) for loading, verifying and enabling the project on the
EL6910/EJ6910 or the logic component!
User name and password are case-sensitive
Pay attention to upper/lower case characters for the user name and password.
The standard user is
Administrator, the standard password is TwinSAFE .
NOTE
Power supply during download
Make sure that the TwinSAFE Logic is not switched off during the download. This can lead to unexpected
behavior or permanently disable the TwinSAFE Logic.
WARNING
Execution of the safety application
During a login or download of a safety application, the execution of the current project is stopped on the
TwinSAFE Logic.
Fig. 65: Download Project Data – The Login dialog
In the Download Project Data dialog specify the user name, the serial number of the EL6910/EJ6910 or the
logic component onto which the project is to be loaded, and the user password. The default user name is
Administrator, the default-password is TwinSAFE . Use the Next button to move to the next dialog.