manualshive.com logo in svg

Beckhoff KL6811, Documentation

Share
Download
Beckhoff KL6811 Documentation Download Page 39

Configuration software KS2000

KL6811

39

Version: 2.0.0

4.4.3

Options

This mask allows you to specify a variety of options for the KL6811.

Fig. 29: KS2000 - Options for the KL6811

Operating mode 

(

R32.12-15 [

}

 47]

)

You can specify the KL6811 operating mode here:

• DALI: The KL6811 operates as a 

DALI [

}

 10]

 master

• DSI: The KL6811 operates as a 

DSI [

}

 11]

 master

Power supply unit

 (

R32.3 [

}

 47]

)

You can switch off the DALI/DSI power supply unit here.

Count DALI devices 

(

R32.4 [

}

 47]

)

Here you can disable the counting of the DALI devices after the KL6811 startup.

Firmware version

 (

R9 [

}

 47]

)

Displays the firmware version of the KL6811 .

4.4.4

Archive

These masks provide clearly arranged tables to facilitate the following tasks for DALI slaves connected to the
KL6811:

• specify association with 16 groups;

• specify the light values for 16 scenes.

Summary of Contents for KL6811





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands