Beckhoff KL3208, Manual

Page: 35 / 56

Configuration Software KS2000
KL3208, KL3228/KS3228 35 Version: 3.3.0
User Defined
If user-defined NTC (255
dec
, see Register R39 [
}
44] ) was selected, you can enter its parameters here.
4.4 Settings for KL3228-0000
The dialog mask for the parameterization of the KL3228-0000 can be found under Settings .
Fig. 20: KL3228 - Settings dialog
Operation mode
Here you can
• activate the user scaling (enUsrScale, R32.0 [
}
43] ) and
• the manufacturer scaling (enManScale, R32.1 [
}
43] ), or
• disable the channel completely (disChannel, R32.11 [ } 43] ).
Resistance thermometer (sensor type)
Here you can set the KL3228-0000 to the connected sensor type ( R32.15-R32.13 [
}
43] ):
• PT1000
• NI1000 with standard characteristic curve
• NI1000 with Landis&Staefa characteristic curve (1500 Ω = 100 °C)
4.5 Sample program for KL register communication via
EtherCAT on KL3314 exemplary
Using the sample programs
This document contains sample applications of our products for certain areas of application. The
application notes provided here are based on typical features of our products and only serve as ex-
amples. The notes contained in this document explicitly do not refer to specific applications. The
customer is therefore responsible for assessing and deciding whether the product is suitable for a
particular application. We accept no responsibility for the completeness and correctness of the
source code contained in this document. We reserve the right to modify the content of this docu-
ment at any time and accept no responsibility for errors and missing information.