Beckhoff EL3413-0000, Documentation

Page: 139 / 200

Commissioning
EL34x3 139 Version: 4.4
• the current
• the voltage
• the active power
• the power factor cos φ
Switching of the individual parameters takes place using the cyclic "Index" output variables (see also tables
in chapter
“Operating modes and settings” [ } 131] ).
5.5.2.4 PM Outputs Channel 1/2/3
Index
The value of the parameter that is to be measured and read in in the corresponding “Variant value” is to be
entered here.
5.5.2.5 PM Outputs Channel Auxiliary
Index
The value of the parameter that is to be measured and read in in the “Value” is to be entered here.
Channel
The phase that is to be measured can be selected here.
5.5.3 Scaling factors
The following overview indicates the scaling factors that are required for the calculation of the actual values
from the raw process data values.