Beckhoff EL3413-0000, Documentation

Page: 131 / 200

Commissioning
EL34x3 131 Version: 4.4
5.4.2 Operating modes and settings
Confirmation of the variable output value, channel 1 - 3
(PDOs: PM inputs Channel 1 – 3, subindex “Index” [0x6000:14 [
}
158], 0x6010:14 [
}
159], 0x6020:14
[
}
160]])
The calculated values can be output on the PDOs: PM Inputs Channel 1 - 3, subindex “Variant value”
[
0x6000:1D [
}
158] , 0x6010:1D [
}
159] , 0x6020:1D [
}
160] ] (see object description [
}
158] ).
To this end, the corresponding values for the measured value to be output should be entered in the PDOs:
PM Outputs Channel 1 - 3, subindex “Index” [
0x7000:01 [
}
163] , 0x7010:01 [
}
163] , 0x7020:01 [
}
163] ].
Values (dec),
Entry in index
0x7000:01 [
}
163] ,
0x7010:01 [
}
163] , 0x7020:01
[
}
163]
Name Unit
0 Apparent power 0.01 VA
1 Reactive power 0.01 var
2 Energy 0.001 Wh
3 Power factor λ 0.001
4 Frequency 0.1 Hz
5 Energy (negative) 0.001 Wh
6 Angle λ between phase Lx and phase L1 0.01°
20 Active power fundamental 0.01 W
21 Apparent power fundamental 0.01 VA
22 Reactive power fundamental 0.01 var
30 Energy positive 0.001 Wh
31 Positive energy (automatically saved) 0.001 Wh
32 Energy (automatic saved) 0.001 Wh
35 Energy negative (automatically saved) 0.001 Wh
44 Frequency average resolution 0.01 Hz
45 Frequency high resolution 0.001 Hz
46 Held frequency 0.1 Hz
47 Held frequency average resolution 0.01 Hz
48 Held frequency high resolution 0.001 Hz
49-255 reserved -
The standard output value is the apparent power.
Note firmware
Index 20..22 and 44/45 from firmware 08 (EL3413-0000) or FW04 (EL3413-0120);
Index 30..32, 35, 46..48 from firmware 10 (further terminals)
Confirmation of the variable output value, auxiliary channel
(PDO: PM Inputs Auxiliary, subindex “Index” 0x6030:11 [
}
162])
The calculated values can be output on the PDO: PM Inputs Auxiliary, subindex “Value” 0x6030:13 [
}
162]
(see object description [
}
162] ).
To this end, the corresponding values for the measured value to be output should be entered in the PDO:
PM Outputs Auxiliary, subindex “Index”
0x7030:01 [ } 163] .