Mounting and wiring
EK3100
13
Version: 1.5
Fig. 4: Dimensions, based on EK9300 as an example.
3.2.2
Installation on mounting rails – Bus Coupler
Snapping onto the mounting rail
The Bus Coupler can simply be snapped onto the mounting rail. To this end position the block on the
mounting rail and push it slightly until it engages on the right-hand side. This is indicated by a distinct click.
Use a screwdriver to push up the lock on the left-hand side, thereby turning it and causing it to engage
audibly.
Fig. 5: Snapping onto the mounting rail, based on the EK9300 as an example.
NOTE
Avoid damage!
Do not force the module or apply excessive pressure!
Installation positions
The installation position of the Bus Coupler is arbitrary.
