Product overview
CX8093
14
Version: 1.6
4.2
CX8093 - Introduction
The CX8093 is a controller with a switched PROFINET port. Alternatively K-bus or E-bus terminals can be
series-connected; the CX8093 automatically detects which type of terminal is connected during the start-up
phase. The control system is programmed with TwinCAT via the fieldbus interface or the additional Ethernet
interface.
In the basic version the CX80xx contains a 512 MB MicroSD card. The basic equipment includes two
Ethernet interfaces as well as a K-bus or E-bus interface.
The shortest usable task time is 1 ms. A task time of 1 to 50 ms is recommended for the I/O data. Other
tasks can also be set slower.
When using shorter cycle times, the total system utilisation rate is to be observed. If too short a cycle time is
selected, the Web visualisation and remote desktop may operate very slowly or cause timeouts. The user is
responsible for projecting and configuring his system such that it is not overloaded.
