Beckhoff CX52 0 Series Manual Download | Manualshive

Page: 75 / 79

background image

Appendix

CX52x0

75

Version: 1.0

13.3

Support and Service

Beckhoff and their partners around the world offer comprehensive support and service, making available fast
and competent assistance with all questions related to Beckhoff products and system solutions.

Beckhoff's branch offices and representatives

Please contact your Beckhoff branch office or representative for

local support and service

on Beckhoff

products!

The addresses of Beckhoff's branch offices and representatives round the world can be found on her internet
pages:

http://www.beckhoff.com

You will also find further

for Beckhoff components there.

Beckhoff Headquarters

Beckhoff Automation GmbH & Co. KG

Huelshorstweg 20
33415 Verl
Germany

Phone:

+49(0)5246/963-0

Fax:

+49(0)5246/963-198

e-mail:

[email protected]

Beckhoff Support

Support offers you comprehensive technical assistance, helping you not only with the application of
individual Beckhoff products, but also with other, wide-ranging services:

• support

• design, programming and commissioning of complex automation systems

• and extensive training program for Beckhoff system components

Hotline:

+49(0)5246/963-157

Fax:

+49(0)5246/963-9157

e-mail:

[email protected]

Beckhoff Service

The Beckhoff Service Center supports you in all matters of after-sales service:

• on-site service

• repair service

• spare parts service

• hotline service

Hotline:

+49(0)5246/963-460

Fax:

+49(0)5246/963-479

e-mail:

[email protected]

«
...
73
74
75
76
77
...
»

Summary of Contents for CX52 0 Series
















































































Reviews:

No comments

Related manuals for CX52 0 Series

Brand: Gateway Pages: 164

Brand: ARE Pages: 39

Brand: AB Quality Pages: 24

Brand: Dell Pages: 2

FPC-7500 Series

Brand: Arbor Technology Pages: 96

DigiDice AB-2003

Brand: Abit Pages: 104

Brand: Shuttle Pages: 34

Brand: Shuttle Pages: 1

Brand: Shuttle Pages: 64

Brand: Vertical Pages: 338

Brand: Mitsubishi Pages: 77

EPC PM 1700tc Nautic

Brand: LAUER Pages: 68

PAX Tower 5535212

Brand: zarges Pages: 28

Brand: MSI Pages: 59

Hetis 800 Series

Brand: MSI Pages: 80

Brand: IBASE Technology Pages: 14

Brand: Aaeon Pages: 101

Brand: XDS Pages: 85

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands