Beckhoff CX1010 Series, Hardware Documentation

Page: 73 / 108

Assembly and connecting
Embedded-PC 71
Advanced BIOS Features
This menu is used for setting the data of the first hard disk connected to the IDE bus as master. The hard disk data
(size, number of cylinders, heads, sectors, pre-compensation and home position of the heads when the disk is
switched off) are displayed automatically for the connected hard disk.
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
CPU Internal Cache [Enabled] Item Help
First Boot Device [HDD-0]
Second Boot Device [USB-HDD]
Third Boot Device [Disabled]
Boot Other Device [Enabled]
Boot Up NumLock Status [On]
Gate A20 Option [Fast]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec) 6
Typmatic Delay (Msec) 250
Security Option [Setup]
OS Select For DRAM > 64 MB [Non-OS2]
Full Screen Logo [Disabled]
↑ ↓ → ← :Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
CPU Internal Cache
Here you can disable the internal CPU cache.
First Boot Device
Here you can specify which drive should boot first. Set the drive to be used as boot drive. Options:

LS120 (LS-Drive)

HDD-0 (hard disc 1)

CDROM (CD-drive)

HDD-1 (hard disc 2)

ZIP100 (Zip-Drive)

USB-FDD (USB-Floppy)

USB-ZIP (USB Zip-Drive)

USB-CDROM (USB CDROM)

LAN (network)

Disabled (disabled)
This setting is used for booting, if the first boot device is not available. Options:

LS120 (LS-Drive)

HDD-0 (hard disc 1)

CDROM (CD-Laufwerk)