Configuration
WLAN stick, NA
13
Version: 1.0
4
Configuration
4.1
Windows 7
The WLAN stick only functions on Windows 7 systems after installing the driver. The configuration software
from Realtek, with which the WLAN stick can be configured, is also installed together with the driver.
• The WLAN stick can be configured as an access point with the configuration software from Realtek.
• A WLAN connection can also be established using Windows standard applications.
4.1.1
Installing the driver
The appropriate driver must first be installed in order to use the WLAN on Windows 7. During the installation,
the Realtek driver and configuration software will be installed. All other WLAN settings can be made with the
software.
Requirements:
• Driver: Provided by Beckhoff Service.
Install the driver as follows:
1. Make sure that the WLAN stick is not yet connected to the Industrial PC.
2. Run the Setup.exe file to start the installation.
3. Follow the further installation instructions.
ð
Restart the Industrial PC after the installation and only then connect the WLAN stick to the Industrial PC.
The WLAN stick is now ready to operate.
