Product Description
Connector description
Serial interface
Serial interface
COM1
The Control Panel is equipped with a COM1 (
X 100
) serial interface (Type
RS232) for the connection of serial peripheral devices.
The protection class of the circular plug-in connector accords to the IP67-
standard.
Power supply
Power supply
The power supply for the Control Panel is established via the Cage clamp
socket
(X 101).
The protection class of the circular plug-in connector accords to the IP67-
standard.
Network interfaces
Network
The RJ-45 sockets (
X 102, X 103
) enable connection of the Control Panel
to an Ethernet network.
While using the FBS-RJ45-8-GS-connector (534494, Fa. Festo AG &
Co.KG) the protection class accords to the IP67-standard.
Protective Earthing
Protective Earthing
The low resistance protective earthing connection is
established via the ground bolt, which is located at the rear of
the housing.
Ethernet cable sets
Patch-
Cable
C9900-K411
Patchcable-Set CAT 7, length 5 m
C9900-K412
Patchcable-Set CAT 7, length 10 m
C9900-K413
Patchcable-Set CAT 7, length 15 m
C9900-K414
Patchcable-Set CAT 7, length 20 m
C9900-K415
Patchcable-Set CAT 7, length 25 m
RS 232-adapter cable
RS 232-adapter cable
The provided RS 232-adapter
cable with the marking C9900-
K234 allows connecting serial
peripheral devices with SUB-D-
connector to the Control Panel.
Pin assignment:
12-pol. Cable
connector
9-pol. Sub-D-
connector
Signal
A
1
DCD
B
6
DSR
C
2
RxD
D
7
RTS
E
3
TxD
F
8
CTS
G
4
DTR
H
9
RI
J
5
GND
K
-
n.c.
L
-
n.c.
M
-
n.c.
screen
screen
screen
6
CP77xx
