Commissioning
CP69xx
22
Version: 3.0
Fig. 10: CP69xx_delivery state clamping lever
To install and secure the Control Panel in the control cabinet, follow the steps shown in Fig. 11 and 12:
1. Insert the Control Panel at the intended position in the panel of the control cabinet. Make sure that the
device is secured against falling out until it is fastened properly.
Fig. 11: CP69xx_wall positioning
2. Fold out the clamping levers 90° (section A and B).
3. Tighten the clamping levers with the Allen key 3.0 mm (section C).
