background image

 

Installation Instructions 

 

 
 

Connecting devices 

 

Power supply plug 

 

Attention 

The power supply plug must be withdrawn! 

Please read the documentation for the external devices prior to 
connecting them. 

During thunderstorms, plug connector must neither be inserted nor 
removed. 

When disconnecting a plug connector, always handle it at the plug. Do not 
pull the cable! 

 
 

Connecting cables 

 

The connections are located at the top of the Industrial PC and are 
documented in the 

Product Description 

chapter. 

 
When connecting the cables to the Industrial PC, proceed according to the 
following sequence: 

• 

Switch off all the devices that are to be connected. 

• 

Disconnect all the devices that are to be connected from the power 
supply. 

• 

Connect all the cables between the Industrial PC and to the 
devices that are to be connected. 

• 

Connect all data transfer cables (if present) to the appropriate 
plug-in receptacles of the data/telecommunication networks. 

• 

Reconnect all devices to the power supply. 

 

 

Check voltage rating and connect 

 

Fitted with the 24 V

DC

 power supply unit: 

1.  Check that the external power supply is providing the correct 

voltage. 

2.  Insert the power supply cable that you have assembled (see 

chapter 

Fitting the cable

) into the Industrial PC's power supply 

socket. Then connect it to your external 24 V power supply. 

 

 

Use same type of rechargeable battery 

 

Attention 

If a 24 V UPS is installed, the same type of rechargeable battery must be 
used. 

CP62xx 

17 

Summary of Contents for CP62 Series




























Reviews: