Beckhoff CP37 Series, Installation And Operating Instructions Manual

Page: 18 / 33

Mounting
16 CP37xx
4 Mounting
4.1 Mounting arm adapter
The Panel PC is designed for mounting arm installation from the top, using the mounting arm adapter.
The mounting arm adapter is designed for Rittal- and Rolec mounting arm systems with 48 mm tubes.
Depending on the order option C9900-M184 the mounting arm can be installed from the bottom:
Order Option Description
C9900-M184 Mounting arm adapter for Panel PC CP37xx, for Rittal and Rolec mounting arm
systems with 48 mm tube from bottom instead of from top.
Note
Tolerance of the mounting arm tube diameter
The mounting arm tube must have a diameter of 48 mm with a maximum tolerance of
–0.1 mm/ +0.8 mm.
Attention
Circulation of air
In order to ensure adequate ventilation of the Panel PC, 20 cm free space is required
around the PC for air circulation.
mounting arm adapter