background image

 

Product Description 

 

2 Product Description 

2.1 Product overview 

 

 
The high-performance multi-touch Panel PC 

With the CP32xx series, a high-end Panel PC with multi-touch can be used directly in the field. The 
devices in a slender aluminium housing feature complete IP 65 protection and are designed for mounting 
arm installation. The Panel PCs offer maximum computing power with processors of the latest generation, 
such as Intel® Celeron® or Core™ i3, i5, or i7. 

A choice of seven different multi-touch TFT displays in sizes between 12-inch and 24-inch and 4:3, 
widescreen, landscape or portrait formats are available. Cooling is achieved by means of cooling fins on 
the outer wall as well as fans inside the closed housing. The operating temperature range is 0 to 45 °C. 

The Panel PC features an integrated rotatable and tiltable mounting arm adapter for a 48 mm diameter 
mounting arm tube. There is a choice of attaching the mounting arm from above or below. The connecting 
cables are laid through the mounting arm. The Industrial PC connections (up to six) with IP 65 connectors 
are positioned in the large wiring space and are easily accessible. The wiring area can be opened easily 
without dismounting the device from the mounting arm, offering fast access to the IP 65 connectors for 
power supply, Ethernet and optional fieldbus, USB or RS232. Prefabricated cables in various lengths are 
available for all connections. The C32xx series Panel PCs are supplied with a 24 V power supply unit, 
optionally with integrated uninterruptible power supply (UPS). A battery pack can be connected externally 
and installed on a DIN rail in the control cabinet. 

The CP32xx Panel PCs are equipped with one or two hard disks, SSDs or CFast cards or combinations 
thereof. With the on-board RAID controller, two same hard disks, SSDs or CFast cards can be mirrored. 
The data media and the lithium battery of the system clock are accessible from the rear under the cover. 

There is a Mini PCI slot in the CP32xx. The Beckhoff Mini PCI Ethernet or fieldbus cards can be factory-
fitted. NOVRAM up to 512 kB is also available in the form of an optional Mini PCI plug-in card for fail-safe 
data storage. 

CP32xx 

Summary of Contents for CP32 Series



































Reviews: