Beckhoff CP29-2-0000 Series, Manual

Page: 6 / 37

For your safety
CP29xx-2xxx-0000 6 Version: 1.3
2 For your safety
The safety chapter explains the safety symbols used and their meanings. They contain fundamental safety
instructions that are essential for the avoidance of personal injuries and damage to property.
Exclusion of liability
Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the
devices outside the documented operating conditions.
2.1 Description of safety symbols
The following safety symbols are used in these operating instructions. In order to avoid personal injuries and
damage to property, read and follow the safety and warning notices.
Warning of personal injuries:
DANGER
Disregarding the safety notice will lead to death or serious injuries.
WARNING
Disregarding the safety notice may lead to death or serious injuries.
CAUTION
Disregarding the safety notice may lead to minor injuries.
Warning of damage to property:
NOTE
Disregarding the notice may lead to damage to property.
2.2 Intended use
The CP29xx multi-touch built-in Control Panel is designed for industrial applications in machine and plant
engineering. A display with multi-finger touch screen is installed in an aluminum housing. The Control Panel
is installed in the front of control cabinets. The Control Panel can be placed up to 5 m away from the PC.
The front of the Control Panel is designed for an IP65 working environment. It offers full protection against
contact and against water jets (nozzle) from any angle and against dust. The rear of the Control Panel is
designed for an IP20 working environment. It is protected against the penetration of fingers and solid foreign
bodies of 12.5 mm or larger in size. It is not protected against water. The specified limits for technical data
must be adhered to.
The Control Panel can be used within the documented operating conditions.
Improper use
Do not use the device outside the documented operating conditions.