Beckhoff CP29-2-0000 Series, Manual

Page: 18 / 37

Commissioning
CP29xx-2xxx-0000 18 Version: 1.3
4.2 Installation in the control cabinet
The CP29xx-2xxx Control Panel is designed for installation in control cabinets for machine and plant
technology. Please observe the environmental conditions prescribed for the operation (see Chapter 8
Technical Data [ } 31] ).
The C6030 Industrial PC can optionally me mounted at the back of the Control Panel. If you choose this
option, you must first install the C6030 before you can mount the Control Panel in the control cabinet. You
will find the corresponding information in the following chapters.
4.2.1 Dimensions
The dimensions of the Control Panel are required for preparing the control cabinet.
If you want to mount a C6030-200x-0060 at the back of the Control Panel, you can find the corresponding
dimensions in the C6030 device documentation.
All dimensions are in mm.
Fig. 6 shows the dimensions of the Control Panel with 15.6 inch display.
414
3
0
2
7,7
53,5
x
y
t
cutout dimensions:
x=
y=
r=
t
=
r
395
290
1,5 - 2,5
2
Fig. 6: CP29xx-2xxx_dimensions, 15.6 inches
Fig. 7 shows the dimensions of the Control Panel with 18.5 inch display.
498
3
4
1
51,5
7,7
x
y
t
cut-out dimensions:
x=
y=
r=
t
=
r
465
319
1,5 - 2,5
2
Fig. 7: CP29xx-2xxx_dimensions, 18.5 inches
Fig. 8 shows the dimensions of the Control Panel with 19 inch display.