Advanced
Kapitel:
BIOS-Einstellungen
Beckhoff New Automation Technology
CB1064-xxxx
Seite 87
4.3.17 SATA and RST Configuration
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ SATA And RST Configuration ▲│Enable or disable SATA Device. │
│ █│ │
│ SATA Controller(s) [Enabled] █│ │
│ SATA Mode Selection [Intel RST Premium] █│ │
│ SATA Test Mode [Disabled] █│ │
│ RAID Device ID [Client] █│ │
│► Software Feature Mask Configuration █│ │
│ Aggressive LPM Support [Enabled] █│ │
│ SATA Controller Speed [Default] █│ │
│ █│ │
│ Serial ATA Port 0 Empty █│ │
│ Software Preserve Unknown █│ │
│ Port 0 [Enabled] █│────────────────────────────────│
│ Hot Plug [Enabled] ░│→←: Select Screen │
│ Configured as eSATA Hot Plug supported ░│↑↓: Select Item n │
│ Spin Up Device [Disabled] ░│Enter: Select │
│ SATA Device Type [Hard Disk Drive] ░│+/-: Change Opt. │
│ Topology [Unknown] ░│F1: General Help │
│ SATA Port 0 DevSlp [Disabled] ░│F2: Previous Values │
│ DITO Configuration [Disabled] ░│F3: Optimized Defaults │
│ DITO Value 625 ░│F4: Save & Exit │
│ DM Value 15 ░│ESC: Exit │
│ Serial ATA Port 1 Empty ░│ │
│ Software Preserve Unknown ░│ │
│ Port 1 [Enabled] ░│ │
│ ░│ │
│ ▼│ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
SATA Controller(s)
Options:
Enabled / Disabled
SATA Mode Selection
Options:
IDE / AHCI / RAID
SATA Test Mode
Options:
Enabled / Disabled
RAID Device ID
Options:
Client / Alternate
Software Feature Mask Configuration
Sub menu: see "Software Feature Mask Configuration" (page 89)
Aggressive LPM Support
Options:
Enabled / Disabled
SATA Controller Speed
Options:
Default / Gen1 / Gen2 / Gen3
Serial ATA Port X
Options:
none
Software Preserve
Options:
none
Port X
Options:
Enabled / Disabled
Hot Plug
Options:
Enabled / Disabled
