manualshive.com logo in svg

Beckhoff CB1064 Series, Manual, Page: 28 / 136

Share
Download
Beckhoff CB1064 Series Manual Download Page 28

Chapter:

 Connectors 

Back Panel Connectors 

page 28 

Beckhoff New Automation Technology 

CB1064-xxxx

 

3.2.6  USB and LAN 

To save space USB and LAN connectors are provided in the form of combo connectors. These comprise 
two USB connectors and one LAN connector. This way all board variants provide four external USB 
channels and two LAN ports. 
All USB channels support USB 3.0. 
You may note that the setting of USB keyboard or USB mouse support in the BIOS-setup is only 
necessary and advisable, if the OS offers no USB-support. BIOS-setup can be changed with a USB 
keyboard without enabling USB keyboard support. Running Windows with these features enabled may 
lead to significant performance or functionality limitations. 
The interfaces provide up to 900 mA current. All USB interfaces are protected by an electronically 
resettable fuse.   
The board also offers two Gigabit-LAN connectors. Both LAN connectors support 10/100/1000 Ethernet 
with automatic bandwith selection. Controller chips are the i219 (PHY, LAN1) and i210 (MAC/PHY, 
LAN2). 

 

 

 

Notice 

For realtime applications, the external controller (MAC/PHY) is to prefer. 

 

Pinout USB3.0 connector for channel X: 

 

Pin 

Name 

Description 

1 

VCC 

5 volt for USBX 

2 

USBX# 

Minus channel USBX 

3 

USBX 

Plus channel USBX 

4 

GND 

ground 

5 

StdA_SSRX- 

SuperSpeed Receiver - 

6 

St 

SuperSpeed Re 

7 

GND 

ground 

8 

StdA_SSTX- 

SuperSpeed Transmitter - 

9 

St 

SuperSpeed Trans 

 

Pinout LAN 10/100/1000: 

Summary of Contents for CB1064 Series









































































































































Reviews:

No comments