Product description
C9900-G070 and C9900-G071
8
Version: 1.0
3
Product description
3.1
Product overview
CP6x06
The C9900-G07x push-button extensions add an emergency stop button and three illuminated push-buttons
to the "Economy" built-in Panel PCs and Control Panels.
The push-button extension can be ordered ex factory for all Control Panels and Panel PCs of the "Economy"
family in size 7 inch (CP6606, CP6706 and CP6906).
C9900-G070 (USB version)
The actuation of the emergency stop and other push-buttons is transferred to the controller via USB and can
be read with TwinCAT. Optionally, customers may use the signals for additional purposes.
• The emergency stop button S1 has two NC contacts and one NO contact. The signal of the NO contact
is transferred to the controller. The two NC contacts can be used by the customer.
• The push-buttons S2 (green) and S4 (blue) each actuate two NO contacts, of which one is relayed to
the controller and one is available as a potential-free contact for use by the customer.
• The push-button S3 (red) actuates an NC contact and an NO contact. The NO contact is relayed to the
controller, the NC contact is available as a potential-free contact for use by the customer.
• The indicator lamps are only controlled via USB.
• All terminal strips are pluggable.
C9900-G071 (hard-wired version)
The actuation of the emergency stop and push-buttons is only queried via the terminal strip.
• The emergency stop button S1 actuates two NC contacts.
• The push-buttons S2 (green) and S4 (blue) each actuate two NO contacts.
• The push-button S3 (red) actuates two NC contacts.
• The indicator lamps can be controlled via the terminal strip. In this case, an additional 24 V
DC
power
supply is required at terminal strips X3.1 and X3.2.
• All terminal strips are pluggable.
