Beckhoff C5240, Installation And Operating Instructions Manual

Page: 16 / 33

Product Description
14 C5240
2.7 USB interfaces and Control Elements
Two additional USB interfaces and the control elements are located behind a flap at the front side of the
Industrial PC. After unlocking the flap with the key, it can be folded down. You now have access to the
control elements:
Interfaces and Control
Elements behind the front
flap
2.7.1 USB interfaces (X112, X113)
The two USB interfaces ( X112 – X113 ) are used to connect peripheral devices with USB connections.
USB2.0 standard is supported.
2.7.2 ATX Push-button
The Industrial PC is switched on via the push-button ( ATX ) (Power on).
2.7.3 Reset-button
The reset-button enables re-booting the Industrial PC.
2.7.4 Status LEDs
•
The LED HDD is illuminated at HDD access.
•
The LED PWR is illuminated when power is on.
•
The LED FB is a multi-color LED and shows the status of fieldbus and TwinCAT:
Color LED FB Description
red TwinCAT STOP
blue TwinCAT CONFIG
blue/ red blinking TwinCAT CONFIG with Bus Error
green TwinCAT RUN
green/ red blinking TwinCAT RUN with Bus Error
X112
Status
LEDs Reset-
button
ATX-
button
X113