Beckhoff BC**50 Series, Documentation

Page: 30 / 90

Parameterization and Commissioning
BC5250 30 Version: 2.0.0
Fig. 19: Selecting the Bus Terminal Controller
All Bus Terminal Controller components are now available:
• Fieldbus interface
• K-bus interface [ } 45]
• PLC Program [
}
47]
• SSB (only Bus Terminal Controllers of the BX series)
Please refer to the relevant chapter for device configuration.
4.2.3 Downloading a TwinCAT configuration
The TwinCAT configuration is loaded into the Bus Terminal Controller via ADS protocol.
Serial ADS protocol
(all Bus Terminal Controllers of the BXxx00 and BCxx50 series)
Enter the serial ADS connection, as described in the chapter Serial ADS [
}
36] .
ADS protocol via the fieldbus
(BC3150, BC5150, BC9x20, BC9050, BX3100, BX5100, BX9000 only)
A prerequisite is that TwinCAT operates as master and is engaged in data exchange, i.e. the physical and
fieldbus configuration must be complete, and data exchange must take place between the master
(e.g. fieldbus master card) and the Bus Terminal Controller.
Choose Target System
Select the Bus Terminal Controller onto which the configuration is to be loaded. Use the function key F8 to
open the dialog for downloading your file to the corresponding device.