background image

Documentation notes

Version: 2.5

───

 

11

AG3300

Notes

Notes are used for important information on the product. The possi-
ble consequences of failure to observe these include:

• Malfunctions of the product

• Damage to the product

• Damage to the environment

Information

This  sign  indicates  information,  tips  and  notes  for  dealing  with  the
product or the software.

Examples

This  symbol  shows  examples  of  how  to  use  the  product  or  soft-
ware.

QR codes

This sign depicts a QR code, via which you can view videos, ani-
mations or other documents. Internet access is required in order to
use it.

You can read the QR code, for example, with the camera of your
Smartphone or Tablet PC. If your camera doesn't support this func-
tion you can download a free QR code reader app for your Smart-
phone. Use the Appstore for Apple operating systems or the
Google Play Store for Android operating systems.

If you cannot read the QR code on paper, make sure that the light-
ing is adequate and reduce the distance between the reading de-
vice and the paper. In the case of documentation on a monitor
screen, use the zoom function to enlarge the QR code and reduce
the distance.

Summary of Contents for AG3300





































































Reviews: