Becker VC210, Assembly And Operating Instructions Manual

Page: 33 / 76

Overwrite the master transmitter for the heating
element
Press the "Heating element" programming button on the radio receiver for
3 seconds.
► The radio receiver remains in programming mode for 3 minutes.
Now press the programming button of the new master transmitter for 10
seconds.
▻
The receiver confirms.
► The new master transmitter is now programmed and the old master
transmitter deleted.
Lighting control unit
Lighting ON/OFF button
< 0.5 s Lighting on with the last dimming value
< 0.5 s Lighting on with the last dimming value
< 0.5 s Lighting off
Dimming
> 1 s Lighting is brighter
> 1 s Lighting is darker
Call up stored dimming values
2x < 1 s Preset dimming value 1 is called up
2x < 1 s Preset dimming value 2 is called up
33 - en