Operating Instructions
Becker Avionics
Activation - Selective Call
98
REU6100
DV64460.03 Issue 11 January 2019
3.8 Speaker
The REU6100 has two adjustable speaker outputs.
•
One can be controlled from the pilot audio control device.
•
One from the copilot audio control device.
3.9 Cockpit Voice Recorder (CVR)
The REU6100 has two cockpit voice recorder outputs for the combined mike and phone signal.
•
One from pilot.
•
One from copilot.
3.10 Alert Tones
The REU6100 has eight predefined alert tones.
•
Each tone can be controlled by a discrete input signal (low active).
•
A separate discrete input can be used to cancel the warning tones by an external switch.
3.11 Signal Tones
•
The REU6100 has two signal tones:
o
The intercom request signal.
o
The E-call signal.
•
Both signals can be enabled or disabled by the configuration setup*.
*Some adjustments of the operating parameters are only available by the configuration setup.
For more information refer to the software manual "CSW6100... " (
www.becker-avionics.com/downloads/
→
Intercom).
3.12 Activation Signal Tones
•
The REU6100 can operate with external switches for the signal tones intercom request
and E-call.
3.13 Activation - Selective Call
•
The REU6100 has a selective call activation input.
•
This input can be enabled or disabled by the configuration setup*.
Detailed information see ACU610X manuals
www.becker-avionics.com/downloads/
→
Intercom).
*Some adjustments of the operating parameters are only available by the configuration setup.
For more information refer to the software manual "CSW6100... " (
www.becker-avionics.com/downloads/
→
Intercom).
