Becker Avionics
Installation
Special Functions
DV64460.03 Issue 11 January 2019
REU6100
77
Relay Mode
The REU6100 can operate in relay mode alternative to dual TX- and multi TX-mode.
•
Only one user can be selected as a relay operator.
•
In the relay mode the number of independent operators and related control devices (ACU)
decreases around 2. For example, for:
REU6100-2-(XXX) from max.4 to max. 2 independent operators.
•
REU6100-3-(XXX) from max.6 to max. 4 independent operators.
•
The selection of two transceivers out of the eight available TX-channels is possible.
o
The selection can be done by activation the monitoring (knob release) of the
relevant TX-radios.
o
The selection of the TX-channels for relay operation can be configured in the
configuration setup.
•
For relay mode operation the transceiver must have a discrete output
(low active) for call identification.
•
The headset in/output of number HS5 and HS6 must be connected for
internal use.
•
The alert tones 1...8 are not available if relay mode is configured.
For detailed information please read ACU610X manuals
www.becker-avionics.com/downloads/
→
Intercom).
Figure 26: Relay Mode
REU6100-3
Audio IN
Mod OUT
PTT OUT
Audio IN
Mod OUT
PTT OUT
Audio IN
Mod OUT
PTT OUT
Audio IN
Mod OUT
PTT OUT
Audio IN
Mod OUT
PTT OUT
Audio IN
Mod OUT
PTT OUT
Audio IN
Mod OUT
PTT OUT
Audio IN
Mod OUT
PTT OUT
Phone
HS5
Mike
Phone
HS6
Mike
Alert Tone 8
Alert Tone 7
Alert Tone 6
Alert Tone 5
Alert Tone 4
Alert Tone 3
Alert Tone 2
Alert Tone 1
COM1
SQL
119.000 MHz
135.000 MHz
COM2
SQL
COM3
SQL
COM4
SQL
COM5
SQL
COM6
SQL
COM7
SQL
COM8
SQL
*
*
* For standard mike operation two capacitors must be installed!
ACU6100 #4
Mike Selector Pos: D/S
for relay operation
ACU6100 #3
ACU6100 #2
ACU6100 #1
