manualshive.com logo in svg

Becker R12 17C PR+, Assembly And Operating Instructions Manual

Share
Download
Becker R12 17C PR+ Assembly And Operating Instructions Manual Download Page 12

Anti-lifting device in the lower limit position to upper stop

Set both switches to the 

delete setting

.

Execute a short drive command.

Set both switches to the 

programming setting

.

Travel to the lower limit position until the tubular drive switches off automatically.

Then open to the permanent upper stop until the tubular drive switches off automatic-
ally.

►

The limit positions are now set.

Deleting the limit positions using the switches

Deleting individual limit positions

It is possible to delete an individual limit position, if lower point to upper point without

stops has been programmed with the switches.

Reset the switch of the corresponding limit position from the programming setting to
the delete setting.

Execute a short drive command.

►

The limit position is now deleted.

Deleting both limit positions

Reset both switches from the programming setting to the delete setting.

Execute a short drive command.

►

Both limit positions are deleted.

12

Summary of Contents for R12 17C PR+

























Reviews:

No comments

Brands by name

Popular brands

Load more brands