GT6201
_________________________________________________________________________________________
Page 42
DV 17001.03 Issue 4 01/2015
Note:
Transmission always uses the active frequency, even if the monitored
frequency is currently audible.
If TX o
n the pre
-
set frequency is required push the “↨/SCN” key to swap active
and pre-
set frequency.
3.6
Squelch
Independent of the selected operation menu, squelch can be toggled “ON” or “OFF” by a short
press on “SQL/IC” key.
•
If the squelch function is active (“ON”) the receiver noise is muted.
•
If the Squelch is “OFF” the arrow sign “►” in front of the Active Frequency stay visible all
the time and receiver noise will be audible as long as signal is received.
Squelch “ON”
Squelch “OFF”
In the users menu, the squelch threshold is adjustable to a convenient trigger level.
3.7
RX Field Strength Indication
The field strength indicator is represented by triangle on the left upper corner of the corresponding
frequency and will appear next to the active or preset frequency in all frequency selection modes.
The field strength of the indicated incoming signals is based on measured RSSI level. The three
levels displayed are:
Weak Signal Strength
Good Signal Strength
Excellent Signal Strength
RSSI
passing squelch level (empty
triangle)
-88 > RSSI > -80dBm
(half-filled triangle)
RSSI > -80dBm
(fully filled triangle)
