Becker GK615-X, Installation And Operation Manual

Page: 22 / 32

Page 3-2 DV 16800.03 Issue 1 12/11
GK615-X
Note:
In this section the display content is mainly shown for transceiver working in 8.33+25 kHz mixed Mode.
Dedicated pictures for 25 kHz Mode are not explicitly shown, because the display content is very simi-
lar (They differ only in number of digits for frequency. Refer chapter 3.4).
3.1.1 Controls
Symbol Description Main Function
1 IC/SQL
(Intercom/Squelch)
”Short press” during normal operation toggles squelch ON/OFF
state.
“Long press” during normal operation activates IC menu.
2 MDE
(Mode)
“Short press” during normal operation changes the frequency
selection mode.
“Long press” during normal operation activates the pilots menu.
3 STO
(Store)
”Short press” during normal operation activates storage
procedure.
4
/ SCN
(Exchange/SCAN)
”Short press” during standard mode or scan mode exchanges
preset frequency and active frequency.
“Long press” activates scan mode.
5 Volume Knob Switches the transceiver ON/OFF and adjusts volume level of
received signal.
6
Rotary encoder Turning rotary encoder changes the settings of several
parameters (frequency, IC-volume, VOX …).
Pushing the rotary encoder toggles between the digits and acts
as an enter key.
7 Display
Long press is detected when the user presses and holds the key for at least 2 seconds, otherwise short
press is assumed.
When any user action is done (e.g. pressing a key) and the operation performed by this control is not al-
lowed at this time, then for a short period of time whole content of the display is inverted.
Beside the main functions described in the table above, the controls are also used for further functions.
This will be described in the dedicated chapter.