4
Music Rest
Attach the included music rest as shown below .
Using a Stand
Please use the
Becker
stands
B-Stand-100
to support your
BSP
-100, this is an optional and you should purchase sep
a
rately .
Refer to the following diagram to assemble the stand . You should install the rear panel in the back side; when assemble the pedal cross bar, you
should turn the stand over then install it .
1.
Align the bottom of the
BSP
-100 with the top slots of the stand; fix the piano with 4 knobbed screws .
2.
Plug the pedal unit cable jack into the [PEDAL UNIT ONLY] socket in the rear panel (Page 6) .
Getting Ready
Four M4X16 screws
Rear panel
Pedal Cross bar
Four M6X25 screws
Peel off protection film on
the pedal unit cable clip;
stick the clips in proper
location in the stand .
Four k
no
bbed screws