Operation:
Use wireless remote to perform the following functions on any iOS7.0 and higher or
Android 4.4 and higher.
Contents:
Frequent asked questions
1.
My vehicle has a CD Changer. Does the BLU-BKR work in vehicles with CD
Changer?
YES
;
but the CD Changer, Aux or iPod adapter
must be disconnected and AUX
mode enabled through radio menu.
2.
Does the BLU-BKR work on all Becker Radios?
NO
;
Works on all Becker radios with
“AUX”
menu option.
Becker radios
without AUX option
(e.g. CR-210, CDR-210, CR-1 etc.), are not compatible,
however if vehicle has a working CD changer, purchase our
3.
Do you offer an adapter that works on Becker radios that do not have
“AUX” input capabilities
or optional CD changer?
YES
;
Purchase our
(CD changer remains functional).
4.
Can I control Smartphone music from the radio buttons?
NO;
you
must continue to use audio device (e.g. Smartphone) built-in
controls and display or optional wireless remote control.
5.
Can I pair or save more than one device to the BLU-BKR?
YES;
more than one device (slaves) can be paired however only one connection
can be active at a time.
6.
I’m getting
noise that increases with engine speed. Is this normal?
If you experience alternator whine (increases with engine speed), we
recommend adding a noise filter
(e.g.
) to power/ground supply lines.
Here is how to add Noise Filter:
Noise filter is installed between 8-pin female plug
(To radio
) and Bluetooth
module as seen in
Fig.8
(Do not cut factory harness)
If necessary, remove black tape from wires near 8-pin female plug
(You will be working on the black/red wires going to Bluetooth module)
a.
Cut red and black wires about 2 inches away from 8-pin plug