Operating Instructions
58
SETTING
INTERMEDIATE POSITION, VENTILATION/REVERSE, Prog1 END LIMIT
(Time/ position programming)
1. You have confirmed the HOLIDAY/LIGHT SENSOR menu levels. INTERMEDIATE POSI-
TION will appear.
2. You can set the switching time to move to the INTERMEDIATE POSITION using the
+/-
button. The switching time is indicated in a few seconds or you can move to the
INTERMEDIATE POSITION from the upper end limit using the DOWN/UP button.
3. Confirm by pressing
OK
.
4. You can set the switching time to move to VENTILATION/REVERSE using the
+/-
but-
ton. The switching time is indicated in a few seconds or you can move to the VENTILA-
TION/REVERSE from the lower end limit using the UP/DOWN button. Confirm by press-
ing
OK
.
5. You have confirmed the VENTILATION/REVERSE menu level. PROG1 END LIMIT / PROG
1 INTERMEDIATE POSITION or PROG 1 VENTILATION/REVERSE will appear.
6. You can select PROG 1END LIMIT, PROG 1INTERMEDIATE POSITION and PROG 1VENTI-
LATION/REVERSE using the
+/-
button.
7. Confirm your selection by pressing
OK
.
8. The function PROG1 END LIMIT has now been set.
9.
Please read on for further programming options using the SETTING menu.
INTERMEDIATE
POSITION
VENTILATION
(REVERSE)
PROG1
END LIMIT
PROG1
INTERMEDIATE
POSITION
PROG1
VENTILATION
