15
Index
/ovld signal 5
Block Diagram of DCC-100 3
Computer, Requirements for DCC 8
Connectors, Pin Assignment 13
Controls, for Cooling 12
Controls, for Detector Gain 11
Controls, for High Current Switches 12
Controls, for Power Outputs 11
Cooler Control 4, 12
Cooling Current 4, 12
Cooling Voltage 4, 12
Current Limit Light 12
CVI Run-Time Engine 8
Detector Control 3
Detector Control Blocks 3
Detector Control Blocks, Overload Shutdown 3
Detector Control Signal 3
Detector Control, DAC 3
Detector Gain 11
Detector Overload 11
Detector Shutdown 11
Device Drivers 9
Disable on Start Function 12
Disable Outputs Button 12
Disable Outputs Function 12
Download, Manual 9
Download, Software 8
Driver Disk 9
Driver, for DCC-100 Module 9
Enable Outputs Button 12
Enable, outputs on startup 11
File, Save and Load 12
Flyback Diode 7
Gain Control Signal 5
H5773 5
H5783 5
H7422 5
H8632 5
Hardware Test 10
HCN-14-3500 6
HFAC-26 Preamplifier 5, 6
High Current Switches 4, 7
High Current Switches, Controls, for 12
High Current Switches, shutdown 4, 9
High Voltage Power Supply 6
High Voltage, Safety Rules 6
HRT-41 7
HRT-81 7
Inductive Load 7
Installation, of DCC Module 9
Installation, of DCC Software 8
Installation, of DCC-100 Driver 9
LabWindows/CVI 8
Load Setup 12
Main Panel 10
Manual, Download 9
Manual, pdf File 9
MCP 6
MCP, Lifetime 6
MCP, Overload 6
MCP, Power Supply 6
Microchannel Plate 6
Outputs, enable on startup 11
Overload Flip-Flop 3
Overload Light 11
Overload Shutdown 3, 10, 11
Overload Shutdown, via HFAC-26 Preamp 3, 5, 6
Overload Signal 3, 5
PEL+ and PEL- pins 4
Peltier Control 4, 12
Peltier Current 4, 12
Peltier Voltage 4, 12
Pin Assignment, of Connectors 13
PMH-100 6
Power Outputs, Switching ON/Off 11
Power Supply, for High Current Switches 7
Power Supply, for MCP 6
Power Supply, High Voltage 6
Power-On, State after 10
Preamplifier 5, 6
Preamplifier, for H5783 and H5773 5
Preamplifier, for H7422 5
Preamplifier, for MCP 6
R3809U 6
Reset, after Detector Shutdown 11
Router 7
Safety Notes 4, 6, 11, 13
Safety Notes, Cooler 4
Safety Notes, High Voltage 6
Save Setup 12
Setup, Load 12
Setup, Save 12
setup.exe 8
Shutdown, at Power-On 10
Shutdown, H7422 5
Shutdown, of Detectors 3, 11
Shutdown, of high current switches 4, 7, 9, 12
Shutter, Locking 7
Shutters 7
Software Start, State after 10
Software, for DCC-100 10
Software, Installation 8
Software, Update 8
Software, Update from the Web 8
Specification 14
Startup Panel 10
Structure of DCC-100 3
Thermoelectric Coolers 4
