29
EN
Dishwasher | Lavavajillas | Máquina de Lavar Loiça
*EN 50242: This programme is the test cycle.
The information for the comparability test in accordance with EN
50242 is as follows:
• Capacity: 12 settings
• Position of upper basket: Low position
• Rinse aid setting: 6 (or 4 for four settings dispenser)
Starting a washing cycle
Draw out the lower and upper baskets, load the dishes and then push
them back.
1. It is recommended to load the lower basket first, then the upper
one (see the section entitled “Loading the Dishwasher”). Pour in the
detergent (see the section entitled “Salt, Detergent and Rinse Aid”).
2. Insert the plug into the socket. The power supply is 220-240 VAC 50
Hz, and the socket specification is 12 A 250 VAC 50 Hz.
3. Make sure that the water supply is turned on to full pressure. Open
the door, press the ON/OFF button, and then press the “programme”
button to select a desired “Washing cycle”. (See the section entitled
“Washing Cycle Table”.)
Apply a little force to ensure the door is properly closed.
NOTE:
A click could be heard when the door is closed perfectly.
When the washing is over, you can shut off the machine by pressing
the ON/OFF button.
Changing the Programme
Premise: A cycle that is underway can only be modified if it still in the
beginning. Otherwise, the detergent may have already been released,
and the appliance may have already drained the wash water. If this
is the case, the detergent dispenser must be refilled (see the section
entitled “Filling in the Detergent Dispenser”).
Open the door and press the current programme button for more
than three seconds to cancel the programme. Then you can change
AF MANUAL MÁQ. LOIÇA ENCASTRE BBIDW5370 A5 (2).indd 29
AF MANUAL MÁQ. LOIÇA ENCASTRE BBIDW5370 A5 (2).indd 29
08/09/2020 12:09
08/09/2020 12:09
