11
OPTIONAL EQUIPMENT
A standard automatic, single station escapement unit can be
supplied for mounting at an assembly station. Four tapped #10-
32 mounting holes are provided. Units with multiple outlet
escapements can be quoted on request.
The
Automatic Escapement
is mounted below the spring feeder
and will dispense one (1) spring when activated by an air signal.
The factory supplies this unit with a restricting fitting installed
on the air cylinder. If this fitting is removed, the air signal provided
by the customer must be controlled air. Full line flow/pressure
will damage the unit.
An
Automatic Escapement Timer
(PN: 69000-775)
may be used to automatically actuate the escapement
at a pre-determined time interval. The time interval
may be varied allowing the customer to dynamically
adjust their spring dispensation rate.
The automatic escapement can also be actuated via an optional
Air Operated Foot-Pedal
(not
shown). This unit allows the user of an auto escapement to manually dispense a spring as desired
by stepping on the foot-pedal. Depressing the pedal allows air to pass though to the escapement
and thus actuate the solenoid.
Summary of Contents for BECMATIC 550
Page 9: ...9 MOUNTING SPECIFICATIONS AUTOMATIC ESCAPEMENT ...
Page 17: ...17 ...
