-30-
In aggregator information: The static LACP static trunk group will be displayed
as follows:
In State Activity:
Active (select):
The port automatically sends LACP protocol packets.
N/A (no select):
The port does not automatically sends LACP protocol
packets, and responds only if it receives LACP protocol packets from the
opposite device.
1. A link that has either two active LACP ports or one active port can
perform dynamic LACP trunking. A link has two N/A LACP ports will not
perform dynamic LACP trunking because both ports are waiting for and
LACP protocol packet from the opposite device.
2. If you are active LACP’s actor, when you select trunking port, the active
status will be created automatically.
3.2.3.3 Forwarding and Filtering
In this submenu, the following functions related to forwarding and filtering are
provided:
