BEC MX-241NP 4G/LTE CBRS Wi-Fi Router
|
3
Reset
Gigabit Ethernet
2/EWAN
1
/
PoE IN
MAIN
DIV/AUX
DC
PoE
DC IN
SIM
01
01
02
03
04
05
06
07
INTERFACE
MEANING
1
4G/LTE Antenna Connectors
(Main/Aux)
SMA female connectors.
Manually screw the cellular antennas tight to the female connectors.
Connect to
Main
if decide to use single antenna instead of two.
2 Power Source
Power ON/OFF switch
(1) with Power Switch ON:
power up by the supplied DC power adapter
(
2) with Power Switch OFF:
power up by the PoE Injector unit
3 Power Jack (DC IN)
Connect the supplied Power Adapter to this jack.
4 Reset
After the device is powered on, press it
6 seconds or above
: to restore to
factory default settings (this is used when you cannot login to the router,
e.g. forgot your password)
5
Gigabit Ethernet
(LAN 1 / PoE)
Ethernet LAN
: Connected to a 10/100/1000Mbps Ethernet device
Ethernet PoE
:
Connect to an 802.3at Gb PoE injector to provide power to
the MX-241NP
6
Gigabit Ethernet
(LAN 2 / EWAN)
Ethernet LAN
: Connected to a 10/100/1000Mbps Ethernet device
Ethernet WAN
: Software configurable in the GUI. Connect to a
broadband device such as a cable modem, ADSL/VDSL modem or fiber
modem.
7 SIM Card Slot
Insert the mini SIM card (2FF) with the gold contact facing down.
Push the mini-SIM card (2FF) inwards to eject it
* Power off the MX-241NP before inserting or removing the SIM card(s)
Rear Panel Connectors