Device Configuration
Interface Setup
– Internet (3G/4G-LTE)
49
BEC MX-200 User Manual
provider.
Connection:
Default set to Always on to keep an always-on 3G/4G-LTE connection.
Keep Alive / IP:
Select
Yes
to keep the 3G/4G-LTE connection always on. Manually enter the Keep
Alive IP Address to be used for ping operation to check if the connection is still on.
Default Route:
Select
Yes
to use this interface as default route interface.
NAT:
Select this option to Disabled/Enable the NAT (Network Address Translation) function. Enable
NAT to grant multiples devices in LAN to access to the Internet through a single WAN IP.
When router’s Internet configuration is finished successfully, you can go to the Status to check
connection information.
MTU:
aximum Transmission Unit. The size of the largest datagram (excluding media-specific headers)
an IP attempts to send through the interface.
0
means to use default MTU size, 1500byte.
Click
Save
to apply the settings.
