Device Configuration
Interface Setup
– Internet (4G/LTE)
39
BEC MX-230 M1 User Manual
Usage Allowance (Cont.)
Mode:
Include
Volume-based
and
Time-based
control.
Volume-based
include “only Download”, "only Upload”, and “Download and Upload” to
limit the flow.
Time-based
control the flow by providing specific hours per month.
The billing period begins on:
the beginning day of billing each month.
Over usage allowance action:
Here are actions to perform when mobile data usage, defined in
Mode
, reached to its maximum.
None:
No action taken
Disconnect:
Disconnect mobile connection
Email Alert:
Send an e-mail alert and keep the mobile connection alive.
Email Alert and Disconnect:
Disconnect mobile connection after an alert e-mail is being
sent.
Save the statistics to ROM:
Every one hour:
Activate the 3G/4G-LTE statistics on data usage and this info will get
updated and saved to the internal memory (ROM) in every hour.
Once the feature is turned on, you can see the amount of data used and how many days left
before next billing cycle starts. Go to
Status >> 3G/4G-LTE Status
page for details.
NOTE:
This statistic information will get deleted after a factory reset.
Disable:
No action taken
IP Pass-through Mode:
When
enabled
, MX-230 M1 is in bridge mode that it does not obtain a WAN
IP address; features such as routing capabilities, NAT, firewall, etc., are being disabled. The client
router that is behind the MX-230 M1 now obtains a WAN IP address. When
disabled
, MX-230 M1 is in
router mode that it handles a WAN IP address and all features become available.
Network Mode:
There are 8 options of service standards:
“Automatic”, “UMTS 3G only”, “GSM 2G
Only”, “UMTS 3G Preferred”, “GSM 2G Preferred”, “GSM and UMTS Only”, “LTE Only”, and “GSM,
UMTS, LTE”. If you are not sure which mode to use, you may select
Automatic
to auto detect
the best